ARCHITECTURAL EXTRUSIONS
Cove Lighting
Driveway & Pavement
High Output Architectural Extrusions
The mounting track fitted in a wall, ceiling, etc. must maintain a straight line. Excessive bending of the mounting track to the curvature of the surface in which it is fitted will prevent the mounting of the fixture.
The extrusion with LED light source, is mostly used to create light illuminations inside rooms. With the possibility of installing a few strips inside the extrusion it can be used as a primary energy-efficient light source.
Due to its structure, and when assembled with other components, it is the basis for the design of various types of light fixtures.
The extrusion is available in a version dedicated for direct wall – ceiling mounting and as an element enabling the assembly of a hanging fixture.
Due to its structure, and when assembled with other components, it is the basis for the design of various types of light fixtures.
The extrusion is available in a version dedicated for direct wall – ceiling mounting and as an element enabling the assembly of a hanging fixture.
Edge: Glass & Acrylic
F18016 extrusions are not construction extrusions!
They are designated exclusively to illuminate glass or acrylic. Therefore, assembly, suspension, or other technical activities related to the panels should be performed using standard elements.
They are designated exclusively to illuminate glass or acrylic. Therefore, assembly, suspension, or other technical activities related to the panels should be performed using standard elements.
F18016 extrusion is dedicated to illuminate the edge of glass or acrylic, thickness of 8mm to 10mm.The advantages of the extrusion are:
Ability to adjust to the thickness of glass/acrylic
Easy mounting of LED Tape and a solid, strong grip of the edge of glass/acrylic.Complete F18016 extrusion consists of 2 extrusions: 18016 (1) dedicated for mounting LED tape up to 10mm wide and F18016 (2) extrusion – the closing extrusion.Additionally the extrusions are equipped with mounting adhesive tape and a silicone strip that assures a solid connection of the two extrusions. F18016 end caps consist of two overlapping parts that are assembled individually. This type of end cap construction enables to hide the gap that is created when thicker glass is assembled into the extrusion. End caps can be mounted before or after the glass is inserted into the extrusion. This activity needs to be performed with care to avoid damaging the delicate grips of the end caps.F18016 (1) needs to be inserted into F18016 (2) starting from one of the ends (not putting them in parallel and inserting the whole length).
Ability to adjust to the thickness of glass/acrylic
Easy mounting of LED Tape and a solid, strong grip of the edge of glass/acrylic.Complete F18016 extrusion consists of 2 extrusions: 18016 (1) dedicated for mounting LED tape up to 10mm wide and F18016 (2) extrusion – the closing extrusion.Additionally the extrusions are equipped with mounting adhesive tape and a silicone strip that assures a solid connection of the two extrusions. F18016 end caps consist of two overlapping parts that are assembled individually. This type of end cap construction enables to hide the gap that is created when thicker glass is assembled into the extrusion. End caps can be mounted before or after the glass is inserted into the extrusion. This activity needs to be performed with care to avoid damaging the delicate grips of the end caps.F18016 (1) needs to be inserted into F18016 (2) starting from one of the ends (not putting them in parallel and inserting the whole length).
MDF Extrusions
